[. . . ] Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Use only with the cart, stand, PORTABLE CART WARNING tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. [. . . ] With “Picture Mode”, you can change the following settings to be suitable for the movie or game screen by one operation; “Game Mode”, “Film Mode”, “Edge Enhancement”, “Noise Reduction”, “Brightness”, “Contrast”, “Hue”, “Saturation” or “Color Temperature”. , game console), select the corresponding input source and set the “Game Mode” setting to “On”. The delay will decrease but in return the picture quality will become poor. – Film Mode*2*4 Video: “Film Mode” detection is not applied and the input signal is handled as a video source. The AV receiver will adjust to the picture source, automatically converting it to the appropriate progressive signal and reproducing the natural quality of the original picture. – Edge Enhancement*2*4*5 Off Low Mid High With this setting, you can make the picture appear sharper. – Noise Reduction*2*4*5 Off Low Mid High With this setting, you can reduce noise appearing on the screen. Zoom: Wide Zoom: Auto: According to the input signals and monitor output setting, the AV receiver automatically selects the “4:3”, “Full”, “Zoom” or “Wide Zoom” mode. See “Monitor Out” for details on the monitor output setting (➔ page 50). En-58 Advanced Operations ■ Brightness*1*2*4 –50 to 0 to +50 With this setting, you can adjust the picture brightness. – Contrast*1*2*4 –50 to 0 to +50 With this setting, you can adjust contrast. – Hue*1*2*4 –50 to 0 to +50 With this setting, you can adjust the color hue between “–50” and “+50”. – Saturation*1*2*4 –50 to 0 to +50 With this setting, you can adjust saturation. – Color Temperature*2*4 Warm Normal Cool With this setting, you can adjust the color temperature. Note • “Picture Adjust” cannot be used when: – The NET input selector is selected, or – “Monitor Out” is set to “Sub”. *1 This procedure can also be performed on the remote controller by using the Quick Setup (➔ page 45). *2 When the “Picture Mode” setting is set to anything other than “Custom”, this setting cannot be used. *3 If the “Resolution” setting is set to “4K Upscaling” (➔ page 50), this setting is fixed at “Off”. *5 If the “Game Mode” setting is set to “On”, this setting is fixed at “Off”. *6 When a 3D video source is input , “Wide Mode” is fixed to “Full”. Audio Selector ■ Audio Selector ARC: The audio signal from your TV tuner can be sent to the HDMI OUT MAIN of the AV receiver. *1 With this selection, the TV’s audio can be automatically selected as a priority among other assignments. [. . . ] Profile: You can play tracks from “Recently Listened Tracks”, “Library” and “Neighbours”. 3 Use q/w to select a station , and press ENTER or 1 to start playback. Enabled buttons: 1, 2, 6 ■ Menu Items I Love this track: Track information is saved in Last. Personal Station: You can play tracks from personalized station (“Your Library”, “Your Neighbourhood” and “Your Recommendations”). [. . . ]